Avaya CMC1 Firmware Download fields and descriptions Field Description, Disable firmware download

Adding or Removing Hardware

Table 54: Firmware Download fields and descriptions

Field	Description		Notes
Source	Type the UUCSS address of the		For a self download, the same
Board’s	source circuit pack.		board is the source board and
Location			target board.
			For a C-LAN-distributed
			download, this is the source
			C-LAN location.
Firmware	Type the complete filename of the
Image File	new firmware image file. If the list
Name	directory board command showed
	that the file had an extension, such
	as.bin, include the extension as well.
Target Board	Type the circuit pack ID, for example		Enter the TN code of the target
Code	“TN2501.”		circuit pack(s).
	Do not type the suffix, such as “AP”,		For a self download, this is the
	“DP”, or “GP”.		same as for the source circuit
			pack.
Suffix	Examples:
	●	For VAL (TN2501AP), type AP.
	●	For C-LAN (TN799DP), type
		DP.
	●	For DS1 (TN464GP/HP), type
		HP.
Firmware	This is blank. It shows a value in the
Vintage	Firmware Download form of a display
	firmware download or a status
	firmware download.
Schedule	Type y to schedule the firmware		Once the firmware download
Download	download for another time.		begins, you cannot make any
	Type n to start the firmware download		changes to this form. You can
	immediately after completing the form.		only disable this schedule using
			disable firmware download and
			then start a new one. (See
			Aborting a firmware download on
			page 246 for instructions.)
			If you answer n(o), then the
			Start Date/Time and Stop
			Date/Time fields disappear. The
			download begins as soon as you
			press Enter.
			1 of 2

240 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways