Avaya CMC1 manual Go to the RFA Website, Have direct connection

Task Table

Go to the RFA Website

The Remote Feature Activation (RFA) website automates some of the upgrade procedures, including generating a License File.

1.At your laptop/PC browser, go to the http://rfa.avaya.com Website:

2.Using your SSO, log in to the RFA website.

3.Follow the links to the RFA Information page.

4.Complete the information necessary to create a License File.

Note:

You must enter a valid hardware serial number before you can actually create a license file. If you don’t have a valid hardware serial number, you can exit RFA while you get the number. The record you created remain in the Transaction state until you create the license file.

If you have problems with a hardware serial number that is not in the SAP database, go to the If you have problems with RFA section.

Have direct connection

If you have a direct connection between RFA and the switch:

1.Using your RFA Job Aids, run the Features Extraction Tool (FET) from the RFA website to create a Switch Configuration File.

2.When prompted, type in the Transaction ID number.

3.The FET creates and uploads the Switch Configuration File automatically.

4.Do not deliver the License File at this time. You will deliver and install it later in this upgrade procedure.

No direct connection

If you do not have a direct connection between RFA and the switch:

1.Run the Features Extraction Tool (FET) from your laptop/PC to create a Switch Configuration File.

2.When prompted, type in the Transaction ID number.

3.Use the FET instructions to create a new switch connection profile.

4.Create the Switch Configuration File.

5.Upload the Switch Configuration File to the RFA website.

6.Deliver the License File to your laptop/PC for installation later in this procedure.

Issue 10 June 2005 183