Avaya CMC1 manual Install malicious call trace, Malicious call trace

Adding or Removing Hardware

Install malicious call trace

The malicious call trace (MCT) voice recorder connects directly to the tip and ring connections of a TN763/D auxiliary trunk circuit pack. See Figure 113. The 909A/B universal coupler provides seizure control to the recorder.

Figure 113: Malicious call trace

J1

7

J2 6

73

82

J3

5

2

			cydf038 PDH 091696
Figure notes:
1.	Malicious call trace voice recorder	4.	Power supply for universal coupler
2.	25-pair cable (T, R, S, S1, Sz, SZ1) to	5.	To SZ1 on TN763/D connector
	TN763/D auxiliary trunk circuit pack	6.	Tip and ring wires
3.	909A/B universal coupler	7.	CBS1/C1 and CBS2/C2

Note:

A wiring block must be locally engineered.

Note:

909A couplers ships with one DW4B-DE cable and two DW8B-SE cables. The 909B ships with one KS-22911L2 power supply, one DW4B-DE cable, and two DW8B-SE cables.

1.Determine the port assignment of the recorder from the malicious call tracing form.

2.Install the 909A/B universal coupler on a vertical surface.

3.Connect the SZ, SZ1, S, and S1 leads from the 909A/B to an auxiliary trunk circuit pack.

a.Tip and ring connect from the voice recorder to the auxiliary trunk circuit pack (J1 on the 909A/B).

b.CBS1/C1 and CBS2/C2 connect from the voice recorder to J2 on the 909A/B.

346 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways