AMX IR instruction manual Installation method B, Installation Method a

Wiring and Installation

FIG. 20 Installation Method A

Two #6 nylon screw anchors and two #6 x 1-inch long screws are provided with each unit.

Installation method B

Use when installing a swivel-mount unit using the provided mounting bracket.

FIG. 21 Installation method B

!On drywall, install using the included wall anchors. Use a 3/16-inch drill bit.

!On wood, install using the included #6 mounting screws.

1.If you are installing the IRX-SM+, remove the housing and wire the unit to the AMX IR receiver as shown in Wiring.

2.If you are installing the AXR-IRSM+, remove the housing and locate the AXlink connector.

IR Sensors and Receivers 15