Functions for Enhancing Projection

 

27

 

 

 

Changing the Aspect for computer images

You can change the aspect of projected images input from the Computer, BNC, DVI-D, or HDMI input port as follows. The original aspect ratio is 16:10 because of the wide panel mounted on the projector. When projecting onto 16:9 screens, set the Aspect to 16:9.

Set Values

Normal

(When the input source is a Computer, DVI-D, or BNC)

Auto

(Only availble when the input source is HDMI)

16:9

Operation

Projects to the full projection size retaining the Aspect of the input image.

Projects in an appropriate aspect based on information from the signal being input.

Projects to the full projection size at an Aspect of 16:9.

Projection example

When a 1024x768 signal is input

When a 1024x768 signal is input

Page 27
Image 27
Epson EB-Z8050W, EB-Z8000WU manual Changing the Aspect for computer images, Set Values Normal, Auto, Operation