Rear
Name Function
AAir exhaust vent
(Lamp cover)
Exhaust vent for air used to cool the projector internally.
Also, open this cover to replace the projector's lamps.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust
vent and do not put your face or hands near the
vent while projection is in progress.
BRear foot When set up on a desk, turn to extend and retract to
adjust the horizontal tilt.
The rear adjustable feet can be removed when the
projector is installed on a ceiling. s Quick Start Guide
CLamp cover open tab Use these tabs to open the lamp cover. s p.89
DRemote Receiver Receives signals from the remote control. s Quick
Start Guide
Name Function
EStatus indicators The color of the indicators and whether they are flashing
or lit indicate the status of the projector. The left
illustration indicates EB-Z8050W. EB-Z8000WU has no
Wireless indicator. s p.71
F[</][>/] button Corrects horizontal Keystone distortion. If pressed while
the configuration menu or a Help screen is displayed,
these buttons only have the [ ] and [ ] functions
which select menu items and setting values. s Quick
Start Guide , p.43
G[Shutter] button Press this button to open or close the electric shutter.
You can close the electric shutter to completely block a
projection. s Quick Start Guide , p.24
H[Esc] button Stops the current function.
If pressed when the configuration menu is displayed, it
moves to the previous menu level. s p.43
I[w/][v/ ]
button
Corrects vertical Keystone distortion. If pressed while
the configuration menu or a Help screen is displayed,
these buttons only have the [ ] and [ ] functions
which select menu items and setting values. s Quick
Start Guide , p.43
J[Enter] button If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
When the configuration menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level. s p.43
K[Menu] button Displays and closes the configuration menu.
s p.43
L[Source Search]
button
Changes to the next input source that is connected to
the projector and is sending an image. s p.21
M[Lens] button Press this button to cycle through the focus, zoom, and
lens shift settings to adjust the lens. s Quick Start Guide
Part Names and Functions
12