You can change the projected image in the following two ways.
•Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
•Changing directly to the target image
You can use the remote control buttons to change to the target input
port.

Automatically Detect Input Signal and Change

the Projected Image (Source Search)

You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the [Source
Search] button on the Remote Control or the Control panel.
AComputer
BBNC
CDVI-D
DS-Video
EVideo
FHDMI
GLAN (EB-Z8050W only): The images projected using EasyMP
Network Projection from a computer connected to the projector
via a network.
Skipped when no image signal is being input.
Procedure
When your video equipment is connected, start playback before
beginning this operation.
Using the Remote Control Using the Control panel
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
Changing the Projected Image
21