
List of Functions |
| 48 |
|
|
|
Settings Menu
Sub Menu
Keystone
Control Panel Lock
Lens Operation Lock
Pointer Shape
Power Consumption
Remote Receiver
User Button
Function
You can correct keystone distortion.
Use the [w/ ], [v/
], [</
], and [>/
] buttons on the control panel to perform similar corrections to
You can use this to restrict operation of the projector's Control panel. s p.39
You can use this to restrict the lens operation of the remote control. s p.40
You can select the shape of the pointer. s p.30
Pointer 1:
Pointer 2:
Pointer 3: 
You can set the lamp brightness to Normal or ECO.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and the fan rotation noise during projection is reduced. Electrical consumption: about 16% decrease, lamp life: about 1.4 times longer
You can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to deactivate the remote receiver you do not want to use or that is experiencing interference.
You can select the item assigned from the configuration menu with the Remote Control's [User] button. By pressing the [User] button the assigned menu item selection/adjustment screen is displayed, allowing you to make
Power Consumption, Info, Progressive, Test Pattern,