Epson EB-Z8050W, EB-Z8000WU manual Changing the Aspect Ratio, Changing methods Procedure

Functions for Enhancing Projection 25

a still photo. Also, you can perform operations such as changing between files during presentations from a computer without projecting any images if the freeze function is activated beforehand.

Procedure

Remote Control

Changing the Aspect Ratio

Change the Aspect Ratiog when video equipment is connected so that images that have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. Change the Aspect Ratio when projecting computer images at full size. The changing methods and the types of Aspect ratio are as follows.

Each time you press the button, Freeze turns on or off.

q	• The	image source		continues to play back the moving images
	even	while	Freeze	is	on,	and so	it	is not possible to resume
	projection		from the		point	where	it	was paused.

•If the [Freeze] button is pressed while the configuration menu or a Help screen is displayed, the menu or Help screen being displayed is cleared.

•Freeze still works while E-Zoom is being used.

Changing methods

Procedure

Remote Control

The Aspect name is displayed on the screen by pressing the button.

If you press the button while the Aspect name is displayed on the screen, it changes to the next Aspect Mode.

q The aspect mode can also be set using Aspect in the Signal menu from the configuration menu. s p.46

Changing the Aspect for video equipment images

Each time the button is pressed, the aspect changes in the order Normal, 16:9, Full, Zoom, and Native.