D
To adjust the shape, use the [h] button on the remote
control or the [w/], [v/], [</], and [>/] buttons on
the control panel.
If the triangle in the direction you are adjusting the shape turns
gray, as shown in the screenshot below, you cannot adjust the
shape any further in that direction.
E
Repeat procedures 3 and 4 as needed to adjust any
remaining corners.
F
When you are done, press the [Esc] button to exit the
correction menu.
Because the correction method was changed to Quick Corner
from Keystone in the configuration menu, when [w/], [v/],
[</], and [>/] buttons are pressed later, the screen for
selecting the corner in procedure 2 is displayed. Change Keystone
from the configuration menu to H/V-Keystone if you want to
correct H/V-Keystone when pressing the [w/], [v/], [</],
and [>/] buttons on the control panel.

Correcting Distortion in the Projected Image

19