
18
RS-232 ASCII CODES
The table below lists the ASCII control codes for the IN1222 / IN1510 / IN1422 / IN1710. These are virtually identical to the codes used with the IN1240 / IN1540, and new codes for the current version are indicated by an asterisk (*). The most current version of firmware as of this writing is V1.4a.
COMMAND
ACI3
ACI4
ACI5
ACI6
ACI7
BAS+
BAS-
BAS,
BASxxx
CMDCD0
CMDCD1
CMDCD2
CMDCD3
CH1
CH2
CH3
CH4
CON+
CON-
CON,
CONxxx
FRZ0
FRZ1
GAM0
GAM1
GAM2
GAM3
GAM4
GAM5
GAM6
GAM7
HSCAN0
HSCAN1
DESCRIPTION
Set ACI to 1200 baud rate default
Set ACI to 2400 baud rate
Set ACI to 4800 baud rate
Set ACI to 9600 baud rate
Set ACI to 19200 baud rate
Increase Bass level by 3dB
Decrease Bass level by 3dB
Set Bass level to 0dB default
Set Bass level to value xxx: range for xxx is 240 - 255
Select command code "[" & "]" default
Select command code "{" & "}"
Select command code "(" & ")"
Select command code "<" & ">"
Select Input 1 power on default setting
Select Input 2
Select Input 3
Select Input 4 - RGB Passive Input
Increase CONTRAST level 1 step
Decrease CONTRAST level 1 step
Set CONTRAST level to normal setting default
Set CONTRAST level to xxx value, xxx:
Disable Freeze Frame (Disable Blanking on IN1510/IN1710) default
Freeze Current Frame (Enable Blanking on IN1510/IN1710)
Disable GAMMA Correction function default
Select GAMMA Correction curve 1
Select GAMMA Correction curve 2
Select GAMMA Correction curve 3
Select GAMMA Correction curve 4
Select GAMMA Correction curve 5
Select GAMMA Correction curve 6
Select GAMMA Correction curve 7
(IN1222/IN1422 only) Disable doubling for current input (15.75 kHz output signal)
(IN1222/IN1422 only) Enable doubling for current input (31.5 kHz output) default
IIN1222 / IN1422 / IN1510 / IN1710 OPERATIONS MANUAL - REV. 2 12/04/99 | ©1994 - INLINE, INC. |