Moving and Storage, Adjusting the Belt Tension

ADJUSTING THE BELT TENSION

The belt must be tensioned if it begins to slip on the rollers. In normal use, however, keep the belt as loose as possible! The belt tension is adjusted by turning the same screws as used for aligning the running belt. If turning the screws will not effect the belt tension, please contact your Tunturi dealer.

1.Increase the treadmill’s speed to 5 km/h (3 mph).

2.Turn both adjustment screws an equal amount, 1/8 turn clockwise.

3.Try to slow the belt down by holding onto the handrails and braking as you walk (as if you were walking downhill). If the belt slips, turn another 1/8 turn and repeat the test. When braking heavily the belt may slip.

MALFUNCTIONS

NOTE! Despite continuous quality control, defects and malfunctions caused by individual components may occur in the equipment. In most cases it’s unnecessary to take the whole device in for repair, as it’s usually sufﬁcient to replace the defective part. If you require spare parts or the equipment does not function properly during use, contact your Tunturi dealer. Always give the model, serial number of your equipment and in case of malfunctions also conditions of use, nature of malfunction and any error code. Use only spane parts mentioned in the spane part list.

If there is a fault in the user interface display, unscrew the 10 locking screws. Detach the cable connector by pressing the clip towards the cable and pulling it off. Be careful not to drop the cable inside the tube. Please contact your local Tunturi distributor for further information on repairing or replacing the meter. When reinstalling the user interface, please tug lightly at the cable to make sure that it’s properly locked.

NOTE! The text "Self cal" on display indicates automatic re-calibration of the lift motor.

16 ::

MOVING AND STORAGE ::

Before moving J6, be sure the power cord is unplugged from the wall and the treadmill. Lift the treadmill from the rear to an angle of about 30 degrees and push it on the front wheels. Lower the treadmill carefully onto the ﬂoor.

You can lift up the running deck of J6F to a space-saving storage position: Turn off the power switch. Take hold of the frame tube underneath the rear part of the running base and lift the running base up.

CAUTION! The gas spring is designed to make lifting the running base easier. Always remember to ensure that the running base is locked in the storage position!

Before moving J6F, be sure the power cord is unplugged from the wall and the treadmill; lift up the running base until it becomes locked. Stand behind the treadmill and support it with your foot on a transportation wheel, grip the hand rails and tilt the treadmill towards yourself so that it rests on the transportation wheels. Lower the treadmill carefully onto the ﬂoor, again supporting it with your foot.

NOTE! Transport the treadmill with extreme caution over uneven surfaces, for example over a step. The treadmill should never be transported upstairs using the wheels over the steps, instead it must be carried.

NOTE! The running belt needs to be realigned and centered after moving.

To prevent malfunctioning of the treadmill, store it in a dry place with as little temperature variation as possible, protected against dust. Always unplug the treadmill from the electrical outlet when not in use.

:: 17

J6F, J6 specifications

The Tunturi J6 and J6F are renowned models in the fitness equipment market, recognized for their reliability, functionality, and user-oriented design. These elliptical trainers are ideal for individuals seeking an effective workout solution that prioritizes comfort and performance.

One of the primary features of the Tunturi J6 and J6F is their robust construction, ensuring durability even in high-usage environments. They are designed to support a wide range of user weights, making them suitable for various fitness levels. The machines are equipped with a smooth and quiet elliptical motion, which reduces the risk of injury compared to running or jogging. This is particularly beneficial for users with joint issues or those recovering from injuries.

The J6 model is known for its user-friendly interface. It comes with an intuitive display that provides essential workout feedback such as time, distance, speed, calories burned, and heart rate. The J6F model takes this a step further by incorporating advanced connectivity features. Users can sync their workout data through mobile apps, allowing for tracking progress over time and creating personalized training programs.

Both models feature multiple resistance levels, providing users with the opportunity to customize their workouts according to their fitness goals. The adjustable stride length allows for greater flexibility, accommodating users of different heights and preferences. Additionally, the J6F model offers built-in workout programs, including interval training and heart rate control, to enhance overall training efficiency.

Comfort is a significant consideration in the design of the Tunturi J6 and J6F. The ergonomic handles are designed to reduce strain during exercise, while the large pedals ensure a stable footing. The machines also come with transportation wheels, allowing for easy movement and storage.

In summary, the Tunturi J6 and J6F elliptical trainers stand out for their sturdy build, advanced technology, and comfort-driven features. They cater to a wide range of fitness enthusiasts, making them a valuable addition to any home gym. Whether for casual users looking to improve their fitness or serious athletes aiming for performance gains, the Tunturi J6 and J6F deliver an effective and enjoyable workout experience.