PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may have been
M6 x 50mm Bolt (39) |
|
|
| M10 Nylon Locknut (35) |
|
|
| M10 Washer (27) |
M8 x 55mm Carriage Bolt (40) |
|
|
M10 x 65mm Bolt (36) | M8 Nylon Locknut (42) | M6 Washer (19) |
M10 x 78mm Bolt (28) |
|
|
|
| M6 x 16mm Bolt (31) |
M10 x 95mm Bolt (34) |
|
|
|
| 12.5mm Spacer (33) |
M10 x 100mm Bolt (38) |
|
|
M10 x 140mm Bolt (37) |
|
|
| 5 |
|