6.Press the 40mm x 50mm Inner Cap (41) into the Seat Frame (6). Press six 8mm Bushings (32) into the Seat Frame and the Backrest Frames (10).
Attach the Seat Bracket (14) to the Seat Frame
(6)with an M10 x 78mm Bolt (28) and an M10 Nylon Locknut (35).
Attach the Seat Bracket (14) to the Frame (1) with an M10 x 100mm Bolt (38) and an M10 Nylon Locknut (35).
Lubricate an M10 x 140mm Bolt (37). Attach the bottom holes in both the Backrest Frames (10) and the two Plastic Plates (26) to the Seat Frame
(6)with the Bolt, two 12.5mm Spacers (33), and an M10 Nylon Locknut (35). Do not overtighten the M10 Nylon Locknut; the Backrest (8) must be able to pivot easily.
Tighten the M8 Nylon Locknuts (42) and the M6 x 50mm Bolts (39) used in step 4.
7.Press two 8mm Bushings (32) into the Leg Lever Bracket (13).
Attach the Leg Lever Bracket (13) to the Seat Frame (6) with the Small Adjustment Knob (29).
8.Press three 50mm Square Inner Caps (22) into the Leg Lever (15). Press a 50mm Round Inner Cap (5) into the weight tube.
Lubricate an M10 x 78mm Bolt (28). Attach the Leg Lever (15) to the Leg Lever Bracket (13) with the Bolt and an M10 Nylon Locknut (35). Do not overtighten the Nylon Locknut; the Leg Lever must pivot freely.
9.Press four 19mm Round Inner Caps (24) into the ends of the two Pad Tubes (25).
Insert the Pad Tubes (25) into the holes in the Leg Lever (15). Slide two Foam Pads (23) onto each Pad Tube.
8
6 |
|
|
|
|
33 | 41 |
|
| |
32 |
| 33 35 |
| |
|
|
| ||
6 |
|
|
|
|
| 32 |
| 10 |
|
35 | 28 |
| 37 | |
|
|
| ||
|
|
| 32 | |
14 |
|
|
| |
|
| 26 |
| |
38 |
|
|
| |
|
|
| Lubricate | |
|
|
| 1 | |
|
|
|
| |
7 |
|
|
|
|
32 | 6 |
|
|
|
13 |
|
|
|
|
29 |
|
|
| |
8 |
|
| 35 | 13 |
| 22 | |||
15 |
|
|
|
|
22 |
|
|
|
|
|
|
| 28 |
|
5 |
|
|
|
|
Weight Tube | 22 |
| ||
9 |
|
|
|
|
23 |
|
|
|
|
15 |
|
|
|
|
24 |
|
|
|
|
23 |
|
|
|
|
|
|
|
| 23 |
|
|
| 25 | 24 |
|
|
|
| |
|
|
|
| 23 |