JVC CA-MXS5RMDB manual Connecting Speakers, To connect an outdoor AM antenna

Page 10

AM antenna

Connecting Speakers

 

 

1

2

3

 

 

Vinyl-covered

 

 

wire

 

 

(not supplied)

 

AM loop antenna

 

 

(supplied)

 

1 Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2 Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM (MW/LW)

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

You can connect the speakers using the speaker cords.

1

2

3, 4

 

 

Red

Red

 

 

 

Black

 

 

Speaker cord

 

Right

 

Left

speaker

 

speaker

1 Twist the core of the cord at the end of each cord, then remove the insulation.

2 Open the speaker terminal.

3 Insert the end of the speaker cord to the terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

4 Close the speaker terminal on the rear of the unit.

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

– 7 –

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Front Panel Display Window Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit CD 0open/close buttons Front PanelSee pages in the parentheses for details About the indications in the main displayDisc number buttons CD 1, CD 2, and CD Remote ControlRemote Control FM/AM button 15Unpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckTo start the display demonstration manually Putting the Batteries into the Remote ControlSee Changing the Main Display Screen on Basic Settings Remote controlTo adjust the clock again Turning On the PowerSetting the Clock To switch off the power supply completely, unplugChanging the Main Display Screen How these settings workNormal screens Changing the Display Brightness and Contrast To store the selected main display screen in backup memoryPress SET to finish the adjustment To change the brightnessBasic and Common Operations Selecting the Sources and Starting Play Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundManual mode Creating Your Own Sound Mode Manual ModeTo use your own sound mode Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search If No PS, PTY, or RT signals are sent by a stationChanging the RDS Information More about RDSNews Switching to a Program Type of Your Choice TemporarilyPress PTY Search again InfoTest function Alarm functionMore about the EON function Description of the PTY codes Playing Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherTo stop playback for a moment To go to another track directly using the number buttonsProgram Play To go to another trackRepeating Tracks or CDs Repeat Play To check the program contentsPlaying at Random Random Play To modify the programPlaying Back an MD Insert an MD into the MD loading slot Basic MD OperationsTo locate a particular point in a track during play Press MD #Repeat to program other tracks you want Press MD # Load an MDIf the total playing time exceed 150 minutes Prohibiting Disc Ejection Disc Lock Random play also stops when you eject the MDRepeating Tracks Repeat Play Tracks of the loaded MD will play at randomRecording on MDs To avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anRecording lamp on the unit starts flashing Recording Any Sound Source Standard RecordingTo select the sound input level For details, see the manual supplied with your equipmentSynchronized Recording Recording CDsFirst Track Recording Press PLAY/REC Mode on the unit To resume recording, press MD #/ 8 againRecording When selecting Stereo Press MD #Select for normal stereo Sound Sync Select for a sound synchronized recordingEditing MDs Introducing MD Editing Functions Selected track starts playing Divide FunctionFirst track or the current track start playing To join the divided tracks again, see the Join functionMove Function Join FunctionTo divide the joined tracks, see the Divide function Slot Erase FunctionPress SET On the unit only Push the joy control downward 1 or upwardRepeat and 5 to select all the track you want to erase ALL Erase FunctionYou can select up to 15 tracks Making Your Own Titles and Screens Title when the MD recorder stops Title entry mode changes as followsPress SET to enter the selected title entry mode Assigning Titles to an MDPress ENTER/DEMO to finish the current title entry Ex. When entering HInput a character Repeat steps 5 and 6 to enter other charactersMake sure that the character you want to change is flashing Changing the TitleYou can make a correction or change the title To erase all the charactersPress the button for the next character you want to input Available Symbols are as followsPress Enter to finish the current title entry On the unit only Press to turn off the unit if it is on Creating Your Own Opening and Ending ScreensTo erase your own screen STANDBY/ON lamp lights redUsing the Timers REC indicator stops flashing, and remains lit Using Recording TimerHow Recording Timer actually works Source changes as followsHow Daily Timer actually works Using Daily TimerTo turn on or off Recording Timer after its setting is done Press to turn off the unit on standby if necessaryTo set the hour of the timer-off time, then Daily indicator stops flashing and remains litTimer Priority Using Sleep TimerHow Sleep Timer actually works General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsMD Messages Troubleshooting When you turn on the unit in the Power Saving modeSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMDB specifications

The JVC CA-MXS5RMDB is a compact yet powerful audio system that caters to both music lovers and casual listeners alike. This model showcases a perfect blend of modern technology and user-friendly design, making it an attractive option for home audio enthusiasts.

One of the standout features of the JVC CA-MXS5RMDB is its impressive sound performance. It is equipped with a powerful amplifier that drives the system's speakers to deliver clear and dynamic audio quality. Whether you are listening to your favorite tracks, watching movies, or enjoying podcasts, the sound produced is rich and immersive. The dual woofers enhance bass response, ensuring that low frequencies are reproduced with depth and clarity, while the high-frequency drivers provide crisp treble.

In terms of connectivity, the CA-MXS5RMDB excels with its versatile options. It supports various input sources, including USB, CD, and FM/AM radio. The inclusion of Bluetooth technology allows users to effortlessly stream music wirelessly from their smartphones, tablets, or laptops. Additionally, there are auxiliary inputs for connecting other devices, making it a convenient choice for anyone looking to integrate multiple audio sources into their setup.

The design of the JVC CA-MXS5RMDB is sleek and modern, fitting seamlessly into any home environment. Its compact size makes it suitable for smaller spaces without sacrificing audio quality. The user interface is intuitive, featuring an easy-to-read display and straightforward controls that simplify operation.

Another key characteristic of this audio system is its digital sound processing technology, which optimizes audio output according to the type of content being played. This ensures that listeners experience an optimized sound profile, whether they're enjoying pop music, classical symphonies, or movie soundtracks.

Furthermore, the CA-MXS5RMDB includes various sound modes and equalizer settings, allowing users to customize their listening experience. It caters to specific preferences, ensuring that every individual can find their ideal sound profile.

Overall, the JVC CA-MXS5RMDB is a remarkable audio solution that combines advanced features, versatility, and stylish design, making it ideal for any audio enthusiast looking to elevate their listening experience.
Top Page Image Contents