JVC CA-MXS5RMDB manual Changing the Display Brightness and Contrast, To change the brightness

Page 16

To store the selected main display screen in backup memory

You can store the selected main display screen in back up memory. So, even though the AC power is unplugged or a power failure occurs, the setting is kept in memory and will not be reset to the display demonstration.

On the unit ONLY:

1 Unplug the AC power cord.

2 Plug the AC power cord again while holding 7 and

ENTER/DEMO at the same time.

3 Select the main display screen setting (DEMO, DOLPHIN, or OFF) by following steps 1 to 4 on page 12.

To erase backup memory

Repeat steps 1 and 2 of the above procedure.

Backup memory is cleared.

•When the AC power plug is reconnected or a power failure is recovered, display demonstration automatically starts.

Changing the Display Brightness and Contrast

To change the brightness

You can change the display brightness whether the unit is turned on or in standby mode.

You can set and memorize the display brightness setting each for power-on time and for power-off (standby) time.

On the unit ONLY:

Press DIMMER/CONTRAST.

Each time you press the button, the display brightness changes as follows:

• When the unit is turned off (on standby):

Dark (POWER SAVING mode*) += Dimmer**

•When the unit is turned on: Bright +=Dimmer***

*During POWER SAVING mode:

•Much less electric power (1.6 watt) is consumed. If not selected, 14 watts of electric power are consumed even while the unit is turned off (on standby).

•“POWER SAVING” appears in the main display.

•You cannot insert an MD in the MD loading slot. To insert an MD, turn on the unit first.

**You can turn on the unit by inserting an MD in the MD loading slot.

***When using some functions, the display window brightens for a while. For examples, when selecting the source either using the buttons on the unit or on the remote control, selecting the CD or MD track using the buttons on the remote control, etc.

During display demonstration

The display always brightens regardless of the dimmer setting.

To change the contrast

You can change the display contrast only when the unit is turned on.

On the unit ONLY:

1 Press and hold DIMMER/CONTRAST for more than 2 seconds.

The CONTRAST ADJ. screen appears.

2 Push and hold the joy control upward (` ) or downward (1 ) to adjust the contrast.

• You adjust the contrast within the range of 0 to +64.

3 Press SET to finish the adjustment.

– 13 –

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Front Panel Display Window Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit Front Panel See pages in the parentheses for detailsCD 0open/close buttons About the indications in the main displayRemote Control Remote ControlDisc number buttons CD 1, CD 2, and CD FM/AM button 15Connecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckTo start the display demonstration manually Putting the Batteries into the Remote ControlSee Changing the Main Display Screen on Basic Settings Remote controlTurning On the Power Setting the ClockTo adjust the clock again To switch off the power supply completely, unplugChanging the Main Display Screen How these settings workNormal screens To store the selected main display screen in backup memory Press SET to finish the adjustmentChanging the Display Brightness and Contrast To change the brightnessBasic and Common Operations Adjusting the Volume To turn down the volume level temporarilySelecting the Sources and Starting Play Reinforcing the Bass SoundCreating Your Own Sound Mode Manual Mode To use your own sound modeManual mode Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSIf No PS, PTY, or RT signals are sent by a station Changing the RDS InformationSearching for Programs by PTY Codes PTY Search More about RDSSwitching to a Program Type of Your Choice Temporarily Press PTY Search againNews InfoTest function Alarm functionMore about the EON function Description of the PTY codes Playing Back CDs Loading CDs Playing Back the Entire Discs Continuous PlayBasic CD Operations To exchange CDs during playback of anotherTo go to another track directly using the number buttons Program PlayTo stop playback for a moment To go to another trackTo check the program contents Playing at Random Random PlayRepeating Tracks or CDs Repeat Play To modify the programPlaying Back an MD Basic MD Operations To locate a particular point in a track during playInsert an MD into the MD loading slot Press MD #Repeat to program other tracks you want Press MD # Load an MDIf the total playing time exceed 150 minutes Random play also stops when you eject the MD Repeating Tracks Repeat PlayProhibiting Disc Ejection Disc Lock Tracks of the loaded MD will play at randomRecording on MDs Before You Start Recording About the track marksTo avoid erasing important recordings To put a track mark manually while recording anRecording Any Sound Source Standard Recording To select the sound input levelRecording lamp on the unit starts flashing For details, see the manual supplied with your equipmentSynchronized Recording Recording CDsFirst Track Recording Press PLAY/REC Mode on the unit To resume recording, press MD #/ 8 againWhen selecting Stereo Press MD # Select for normal stereoRecording Sound Sync Select for a sound synchronized recordingEditing MDs Introducing MD Editing Functions Divide Function First track or the current track start playingSelected track starts playing To join the divided tracks again, see the Join functionMove Function Join FunctionTo divide the joined tracks, see the Divide function Erase Function Press SET On the unit onlySlot Push the joy control downward 1 or upwardRepeat and 5 to select all the track you want to erase ALL Erase FunctionYou can select up to 15 tracks Making Your Own Titles and Screens Title entry mode changes as follows Press SET to enter the selected title entry modeTitle when the MD recorder stops Assigning Titles to an MDEx. When entering H Input a characterPress ENTER/DEMO to finish the current title entry Repeat steps 5 and 6 to enter other charactersChanging the Title You can make a correction or change the titleMake sure that the character you want to change is flashing To erase all the charactersPress the button for the next character you want to input Available Symbols are as followsPress Enter to finish the current title entry Creating Your Own Opening and Ending Screens To erase your own screenOn the unit only Press to turn off the unit if it is on STANDBY/ON lamp lights redUsing the Timers Using Recording Timer How Recording Timer actually worksREC indicator stops flashing, and remains lit Source changes as followsUsing Daily Timer To turn on or off Recording Timer after its setting is doneHow Daily Timer actually works Press to turn off the unit on standby if necessaryTo set the hour of the timer-off time, then Daily indicator stops flashing and remains litTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance To clean the CDGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsMD Messages Troubleshooting When you turn on the unit in the Power Saving modeSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMDB specifications

The JVC CA-MXS5RMDB is a compact yet powerful audio system that caters to both music lovers and casual listeners alike. This model showcases a perfect blend of modern technology and user-friendly design, making it an attractive option for home audio enthusiasts.

One of the standout features of the JVC CA-MXS5RMDB is its impressive sound performance. It is equipped with a powerful amplifier that drives the system's speakers to deliver clear and dynamic audio quality. Whether you are listening to your favorite tracks, watching movies, or enjoying podcasts, the sound produced is rich and immersive. The dual woofers enhance bass response, ensuring that low frequencies are reproduced with depth and clarity, while the high-frequency drivers provide crisp treble.

In terms of connectivity, the CA-MXS5RMDB excels with its versatile options. It supports various input sources, including USB, CD, and FM/AM radio. The inclusion of Bluetooth technology allows users to effortlessly stream music wirelessly from their smartphones, tablets, or laptops. Additionally, there are auxiliary inputs for connecting other devices, making it a convenient choice for anyone looking to integrate multiple audio sources into their setup.

The design of the JVC CA-MXS5RMDB is sleek and modern, fitting seamlessly into any home environment. Its compact size makes it suitable for smaller spaces without sacrificing audio quality. The user interface is intuitive, featuring an easy-to-read display and straightforward controls that simplify operation.

Another key characteristic of this audio system is its digital sound processing technology, which optimizes audio output according to the type of content being played. This ensures that listeners experience an optimized sound profile, whether they're enjoying pop music, classical symphonies, or movie soundtracks.

Furthermore, the CA-MXS5RMDB includes various sound modes and equalizer settings, allowing users to customize their listening experience. It caters to specific preferences, ensuring that every individual can find their ideal sound profile.

Overall, the JVC CA-MXS5RMDB is a remarkable audio solution that combines advanced features, versatility, and stylish design, making it ideal for any audio enthusiast looking to elevate their listening experience.
Top Page Image Contents