JVC CA-MXS5RMDB manual Erase Function, Press SET On the unit only, Slot

Continued

3 Push the joy control downward (1 ) or upward (` ) to select “MOVE,” then press SET.

4 Push the joy control downward (1 ) or upward (` ) to select the track you want to move.

Ex. When you want to move track 3

8 Press ENTER/DEMO to finish the editing procedure.

9 Press 0for the MD recorder to eject the MD.

“WRITING” appears while the editing you have made is being recorded on the MD.

ERASE Function

This function allows you to erase an unwanted track.

• To stop any time during editing process, press EDIT.

5 Press SET.	On the unit ONLY:
	1	Insert an MD you want to edit into the MD loading
		slot.
	2	Press EDIT.
		The source is changed to “MD,” and the MD recorder
• If you have selected a wrong track number, press		enters editing mode (with DIVIDE function selected).

CANCEL, then select the correct track number.

6	Push the joy control downward (1 ) or upward
	(` ) to select the position where you want to
	move the track.
7	Ex. When you want to move to the track 5 position	3 Push the joy control downward (1 ) or upward
	Press SET.

(` ) to select “ERASE,” then press SET.

•If you have selected wrong tracks, press CANCEL, then select the correct tracks by repeating from step 4.

– 42 –