JVC CA-MXS5RMDB manual Specifications

Page 63

Specifications

Amplifier

Output Power (IEC 268-3/DIN):

30 watts per channel, min. RMS, both channels driven into 6 ohms at 1 kHz, with no more than 0.9% total harmonic distortion

Audio input sensitivity/Impedance (at 1 kHz) Analog input:

TAPE: 500 mV/47 kohms (at “INPUT Level 1”) 195 mV/47 kohms (at “INPUT Level 2”)

Digital input:

AUX: Optical

Signal wave length: 660 nm

Input level: –23 dBm to –15 dBm (With the built-in sampling rate converter, corresponding to 32 kHz/44.1 kHz/48 kHz)

Audio output level/Impedance (at 1 kHz)

TAPE: 160 mV/3.9 kohms

Speakers/Impedance: 6 – 16 ohms

Tuner

FM tuning range:

87.50 — 108.00 MHz

AM (MW/LW) tuning range:

MW:

522

—

1,629 kHz

LW:

144

—

288 kHz

CD player

CD Capacity:

3 CDs

Dynamic range:

92 dB

Signal-to-noise ratio:

100 dB

Wow and flutter:

Immeasurable

MD recorder

Audio playing system: MiniDisc digital audio system

Recording system:

Magneto-optical overwrite system

Reading system:

Non-contact, semiconductor laser

 

pickup (λ=780 nm)

Error correction system:

CIRC (Cross Interleave Reed-

 

Solomon Code)

Sampling frequency:

44.1 kHz

 

(With sampling rate converter for

 

recording — 32 kHz/44.1 kHz/

 

48 kHz)

Audio compression system:

ATRAC (Adaptive TRansform Acoustic Coding)

General

Power requirement:

AC 230V , 50 Hz

Power consumption:

95 watts (at operation)

 

1.6 watts (on standby: with Power

 

Saving On)

 

14 watts (on standby: with Power

 

Saving Off)

Dimensions (approx.):

215 x 180 x 346 mm (W/H/D)

 

(81/2 x 71/8 x 135/8 in.)

Mass (approx.):

6.9 kg (15.3 lbs)

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

– 60 –

Page 62 Page 64
Image 63
Page 62 Page 64
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Introduction PrecautionsContents Location of the Buttons and Controls Front Panel Display WindowBecome familiar with the buttons and controls on your unit About the indications in the main display Front PanelSee pages in the parentheses for details CD 0open/close buttonsFM/AM button 15 Remote ControlRemote Control Disc number buttons CD 1, CD 2, and CDFM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antennaTo connect a cassette deck Connecting Other EquipmentPutting the Batteries into the Remote Control To start the display demonstration manuallySee Changing the Main Display Screen on Remote control Basic SettingsTo switch off the power supply completely, unplug Turning On the PowerSetting the Clock To adjust the clock againHow these settings work Changing the Main Display ScreenNormal screens To change the brightness To store the selected main display screen in backup memoryPress SET to finish the adjustment Changing the Display Brightness and ContrastBasic and Common Operations Reinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the Sources and Starting PlaySelecting the Sound Modes Creating Your Own Sound Mode Manual ModeTo use your own sound mode Manual modeListening to FM and AM MW/LW Broadcasts Tuning in a Station Presetting StationsTo change the FM reception mode Receiving FM Stations with RDS Tuning in a Preset StationMore about RDS If No PS, PTY, or RT signals are sent by a stationChanging the RDS Information Searching for Programs by PTY Codes PTY SearchInfo Switching to a Program Type of Your Choice TemporarilyPress PTY Search again NewsAlarm function Test functionMore about the EON function Description of the PTY codes Playing Back CDs To exchange CDs during playback of another Loading CDsPlaying Back the Entire Discs Continuous Play Basic CD OperationsTo go to another track To go to another track directly using the number buttonsProgram Play To stop playback for a momentTo modify the program To check the program contentsPlaying at Random Random Play Repeating Tracks or CDs Repeat PlayPlaying Back an MD Press MD # Basic MD OperationsTo locate a particular point in a track during play Insert an MD into the MD loading slotLoad an MD Repeat to program other tracks you want Press MD #If the total playing time exceed 150 minutes Tracks of the loaded MD will play at random Random play also stops when you eject the MDRepeating Tracks Repeat Play Prohibiting Disc Ejection Disc LockRecording on MDs To put a track mark manually while recording an Before You Start RecordingAbout the track marks To avoid erasing important recordingsFor details, see the manual supplied with your equipment Recording Any Sound Source Standard RecordingTo select the sound input level Recording lamp on the unit starts flashingRecording CDs Synchronized RecordingFirst Track Recording To resume recording, press MD #/ 8 again Press PLAY/REC Mode on the unitSound Sync Select for a sound synchronized recording When selecting Stereo Press MD #Select for normal stereo RecordingEditing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionFirst track or the current track start playing Selected track starts playingJoin Function Move FunctionTo divide the joined tracks, see the Divide function Push the joy control downward 1 or upward Erase FunctionPress SET On the unit only SlotALL Erase Function Repeat and 5 to select all the track you want to eraseYou can select up to 15 tracks Making Your Own Titles and Screens Assigning Titles to an MD Title entry mode changes as followsPress SET to enter the selected title entry mode Title when the MD recorder stopsRepeat steps 5 and 6 to enter other characters Ex. When entering HInput a character Press ENTER/DEMO to finish the current title entryTo erase all the characters Changing the TitleYou can make a correction or change the title Make sure that the character you want to change is flashingAvailable Symbols are as follows Press the button for the next character you want to inputPress Enter to finish the current title entry STANDBY/ON lamp lights red Creating Your Own Opening and Ending ScreensTo erase your own screen On the unit only Press to turn off the unit if it is onUsing the Timers Source changes as follows Using Recording TimerHow Recording Timer actually works REC indicator stops flashing, and remains litPress to turn off the unit on standby if necessary Using Daily TimerTo turn on or off Recording Timer after its setting is done How Daily Timer actually worksDaily indicator stops flashing and remains lit To set the hour of the timer-off time, thenUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Handling CDs MaintenanceTo clean the CD General NotesAtrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsAdditional Information MD Disc TypesMD limitations Sound Skip Guard MemoryMD Messages When you turn on the unit in the Power Saving mode TroubleshootingSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMDB specifications

The JVC CA-MXS5RMDB is a compact yet powerful audio system that caters to both music lovers and casual listeners alike. This model showcases a perfect blend of modern technology and user-friendly design, making it an attractive option for home audio enthusiasts.

One of the standout features of the JVC CA-MXS5RMDB is its impressive sound performance. It is equipped with a powerful amplifier that drives the system's speakers to deliver clear and dynamic audio quality. Whether you are listening to your favorite tracks, watching movies, or enjoying podcasts, the sound produced is rich and immersive. The dual woofers enhance bass response, ensuring that low frequencies are reproduced with depth and clarity, while the high-frequency drivers provide crisp treble.

In terms of connectivity, the CA-MXS5RMDB excels with its versatile options. It supports various input sources, including USB, CD, and FM/AM radio. The inclusion of Bluetooth technology allows users to effortlessly stream music wirelessly from their smartphones, tablets, or laptops. Additionally, there are auxiliary inputs for connecting other devices, making it a convenient choice for anyone looking to integrate multiple audio sources into their setup.

The design of the JVC CA-MXS5RMDB is sleek and modern, fitting seamlessly into any home environment. Its compact size makes it suitable for smaller spaces without sacrificing audio quality. The user interface is intuitive, featuring an easy-to-read display and straightforward controls that simplify operation.

Another key characteristic of this audio system is its digital sound processing technology, which optimizes audio output according to the type of content being played. This ensures that listeners experience an optimized sound profile, whether they're enjoying pop music, classical symphonies, or movie soundtracks.

Furthermore, the CA-MXS5RMDB includes various sound modes and equalizer settings, allowing users to customize their listening experience. It caters to specific preferences, ensuring that every individual can find their ideal sound profile.

Overall, the JVC CA-MXS5RMDB is a remarkable audio solution that combines advanced features, versatility, and stylish design, making it ideal for any audio enthusiast looking to elevate their listening experience.
Top Page Image Contents