JVC CA-MXS5RMDB manual Troubleshooting, When you turn on the unit in the Power Saving mode

Page 62

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Unable to record on an MD.

Poor radio reception.

Possible Cause

Connections are incorrect, or loose.

•You are using a prerecorded MD.

•The MD is write-protected.

•The antenna is not connected correctly.

Action

Check all connections and make corrections. (See pages 6 – 9.)

•Change it with a recordable MD.

•Unprotect the MD. (See page 33.)

•Reconnect the antenna securely.

Unable to operate the remote control.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

•The path between the remote control and the remote sensor on the unit is blocked.

•Change the position and direction of the AM loop antenna.

•Extend FM antenna to the best reception position.

•Remove the obstruction.

Loaded CDs and MD cannot be ejected.

•

The batteries have lost their charge.

•

Replace the batteries. (See page 9.)

•

The main AC power cord is not

 

•

Plug in the AC power plug.

 

plugged in.

 

 

The CD does not play.

The CD skips.

If “AUX DIGITAL UNLOCK” appears in the main display.

If “CAUTION!” appears in the main display.

•The Disc Lock function is in use.

The CD is upside down.

The CD is dirty or scratched.

There is no digital device connected to the AUX terminal.

Something is wrong with your unit.

•Turn off the Disc Lock function. (See page 31.)

Put the CD in with the label side up.

Clean or replace the CD. (See page 55.)

Connect a digital device using digital optical cord. (See page 8.)

Unplug the unit immediately, then consult your dealer.

Operations are disabled.

The built-in microprocessor has

 

Unplug the unit then plug it back in.

malfunctioned due to external electrical

 

 

interference.

 

 

When you turn on the unit in the POWER

SAVING mode

A mechanical noise will be heard from the MD recorder section. This is a startup noise of power supply to the MD mechanism, not a malfunction of the unit.

– 59 –

Page 61 Page 63
Image 62
Page 61 Page 63
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel Display Window CD 0open/close buttons Front PanelSee pages in the parentheses for details About the indications in the main displayDisc number buttons CD 1, CD 2, and CD Remote ControlRemote Control FM/AM button 15Unpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckSee Changing the Main Display Screen on Putting the Batteries into the Remote ControlTo start the display demonstration manually Basic Settings Remote controlTo adjust the clock again Turning On the PowerSetting the Clock To switch off the power supply completely, unplugNormal screens How these settings workChanging the Main Display Screen Changing the Display Brightness and Contrast To store the selected main display screen in backup memoryPress SET to finish the adjustment To change the brightnessBasic and Common Operations Selecting the Sources and Starting Play Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundManual mode Creating Your Own Sound Mode Manual ModeTo use your own sound mode Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Tuning in a Preset Station Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search If No PS, PTY, or RT signals are sent by a stationChanging the RDS Information More about RDSNews Switching to a Program Type of Your Choice TemporarilyPress PTY Search again InfoMore about the EON function Alarm functionTest function Description of the PTY codes Playing Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherTo stop playback for a moment To go to another track directly using the number buttonsProgram Play To go to another trackRepeating Tracks or CDs Repeat Play To check the program contentsPlaying at Random Random Play To modify the programPlaying Back an MD Insert an MD into the MD loading slot Basic MD OperationsTo locate a particular point in a track during play Press MD #If the total playing time exceed 150 minutes Load an MDRepeat to program other tracks you want Press MD # Prohibiting Disc Ejection Disc Lock Random play also stops when you eject the MDRepeating Tracks Repeat Play Tracks of the loaded MD will play at randomRecording on MDs To avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anRecording lamp on the unit starts flashing Recording Any Sound Source Standard RecordingTo select the sound input level For details, see the manual supplied with your equipmentFirst Track Recording Recording CDsSynchronized Recording Press PLAY/REC Mode on the unit To resume recording, press MD #/ 8 againRecording When selecting Stereo Press MD #Select for normal stereo Sound Sync Select for a sound synchronized recordingEditing MDs Introducing MD Editing Functions Selected track starts playing Divide FunctionFirst track or the current track start playing To join the divided tracks again, see the Join functionTo divide the joined tracks, see the Divide function Join FunctionMove Function Slot Erase FunctionPress SET On the unit only Push the joy control downward 1 or upwardYou can select up to 15 tracks ALL Erase FunctionRepeat and 5 to select all the track you want to erase Making Your Own Titles and Screens Title when the MD recorder stops Title entry mode changes as followsPress SET to enter the selected title entry mode Assigning Titles to an MDPress ENTER/DEMO to finish the current title entry Ex. When entering HInput a character Repeat steps 5 and 6 to enter other charactersMake sure that the character you want to change is flashing Changing the TitleYou can make a correction or change the title To erase all the charactersPress Enter to finish the current title entry Available Symbols are as followsPress the button for the next character you want to input On the unit only Press to turn off the unit if it is on Creating Your Own Opening and Ending ScreensTo erase your own screen STANDBY/ON lamp lights redUsing the Timers REC indicator stops flashing, and remains lit Using Recording TimerHow Recording Timer actually works Source changes as followsHow Daily Timer actually works Using Daily TimerTo turn on or off Recording Timer after its setting is done Press to turn off the unit on standby if necessaryTo set the hour of the timer-off time, then Daily indicator stops flashing and remains litHow Sleep Timer actually works Using Sleep TimerTimer Priority General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsMD Messages Troubleshooting When you turn on the unit in the Power Saving modeSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMDB specifications

The JVC CA-MXS5RMDB is a compact yet powerful audio system that caters to both music lovers and casual listeners alike. This model showcases a perfect blend of modern technology and user-friendly design, making it an attractive option for home audio enthusiasts.

One of the standout features of the JVC CA-MXS5RMDB is its impressive sound performance. It is equipped with a powerful amplifier that drives the system's speakers to deliver clear and dynamic audio quality. Whether you are listening to your favorite tracks, watching movies, or enjoying podcasts, the sound produced is rich and immersive. The dual woofers enhance bass response, ensuring that low frequencies are reproduced with depth and clarity, while the high-frequency drivers provide crisp treble.

In terms of connectivity, the CA-MXS5RMDB excels with its versatile options. It supports various input sources, including USB, CD, and FM/AM radio. The inclusion of Bluetooth technology allows users to effortlessly stream music wirelessly from their smartphones, tablets, or laptops. Additionally, there are auxiliary inputs for connecting other devices, making it a convenient choice for anyone looking to integrate multiple audio sources into their setup.

The design of the JVC CA-MXS5RMDB is sleek and modern, fitting seamlessly into any home environment. Its compact size makes it suitable for smaller spaces without sacrificing audio quality. The user interface is intuitive, featuring an easy-to-read display and straightforward controls that simplify operation.

Another key characteristic of this audio system is its digital sound processing technology, which optimizes audio output according to the type of content being played. This ensures that listeners experience an optimized sound profile, whether they're enjoying pop music, classical symphonies, or movie soundtracks.

Furthermore, the CA-MXS5RMDB includes various sound modes and equalizer settings, allowing users to customize their listening experience. It caters to specific preferences, ensuring that every individual can find their ideal sound profile.

Overall, the JVC CA-MXS5RMDB is a remarkable audio solution that combines advanced features, versatility, and stylish design, making it ideal for any audio enthusiast looking to elevate their listening experience.
Top Page Image Contents