NordicTrack NTSY06990 manual Make sure the Cable is in the groove

18. Route the Low Cable (72) through the indicated slot	18
in the Main Upright (3) and the Base (8).
		35
Wrap the Low Cable (72) around a 4Ó Pulley (35) in		62
the direction shown.
Attach the 4Ó Pulley (35) to the welded bracket on the
Main Upright (3) with a 3/8Ó x 2Ó Bolt (62) and a 3/8Ó		72
Nylon Locknut (50).			Slot
	50	3	8
19. Wrap the Low Cable (72) around a 4Ó Pulley (35).	19

Slide the 4Ó Pulley (35) and a Cable Trap (44) in between the two Pulley Plates (31).

Attach the 4Ó Pulley (35) and the Cable Trap (44) to
the lowest adjustment hole in the Pulley Plates (31)
with a 3/8Ó x 1 3/4Ó Bolt (60) and a 3/8Ó Nylon Jamnut	31
(63). Make sure the Cable is in the groove of the
	Adjustment
Pulley and that the Cable Trap is oriented as
shown, so it will hold the Cable in place.	Holes
	60
	63
	44
	72
	35

20. Slide a Cable Trap (44) onto a 3/8Ó x 4Ó Bolt (65).	20	72	44
Wrap the Low Cable (72) around a 4Ó Pulley (35).			65
Attach the Pulley to the indicated hole in the Main
		42
Upright (3) with the 3/8Ó x 4Ó Bolt (65), the Cable Trap
(44), a 5/8Ó x 1/2Ó Pulley Bushing (42), a 3/8Ó Flat
Washer (55), and a 3/8Ó Nylon Jamnut (63). Make
sure the Cable Trap is oriented as shown, so it			3
will hold the Cable in place.
		55	35
		63

12