NordicTrack NTCCEX04901 user manual Make, Marked are facing the springs, Console

2. Connect the Extension Wire (66) to the Wire		2		62
Harness (22). Attach the Upright (2) to the Frame (1)
with four M6 x 12.7mm Button Screws (62), four M6				57
Split Washers (57), and four M6 Flat Washers (67).				67
Slide the Collar (48) onto the Upright (2). Align the				2
slit in the Collar with the seam between the Side
				57
Shields (4, 5). Snap the Collar into the Side Shields.
				48
				67
				1
				66	5
				4
				22
				Seam
3. The Console (3) requires four “D” batteries (not		3
included). Alkaline batteries are recommended. To
				Bookrack
install batteries, turn the Console face down and
remove the battery cover, as shown in the inset
drawing. Insert four batteries into the Console.		Make		Console
sure that the negative ends of the batteries
(marked “—”) are facing the springs in the				Wire
Console.	Then, reattach the battery cover.			66
				45	3
Connect the Extension Wire (66) to the console wire.			63
Attach the Console (3) to the Upright (2) with four
				Battery Cover
Console Washers (45) and four Console Screws
(63).				2
		45		45
Snap the bookrack onto the Console (3) in the indicat-			63	3
ed location.
4. Attach the Handlebars (11) to the Seat Carriage (6)		4
with four M6 x 35mm Bolts (70) and four M6 Nylon
Locknuts (71).				11
				6
			11	71
				70
		5