WEIGHT RESTS AND SAFETY SPOTTERS
To use the barbell (not included) with the weight rack, first move the Weight Rests (19, 20) and the Safety Spotters (17, 18) to the correct heights for the exer- cise to be performed. Engage the locking pins around the Front Uprights (6).
WARNING: Always place both Weight Rests (19, 20) and both Safety Spotters (17, 18) at the same height. Make sure the lock- ing pins are securely wrapped around the Front Uprights (6) before setting the barbell (not shown) on them.
19 |
6 |
Locking |
Pin |
17 |
CABLE DIAGRAM
The cable diagram shows the proper routing of the Cable (31). Use the diagram to make sure that the Cable and Cable Traps (27) have been assembled correctly. If the Cable has not been correctly routed, the weight bench will not function properly and dam- age may occur. The numbers show the correct route for the Cable.
2
4
1 
3 
4
5
12