NordicTrack NTB39020 user manual

Page 10

16.Wrap the Short Cable (44) under a 3 1/2” Pulley (34). Attach the Pulley inside the Base Frame (1) with an M10 x 165mm Button Head Bolt (5) and an M10 Nylon Locknut (64).

17.Wrap the Short Cable (44) under a 3 1/2” Pulley (34). Attach the Pulley inside the Base Frame (1) with an M10 x 165mm Button Head Bolt (5) and an M10 Nylon Locknut (64). Make sure the

Cable is between the Pulley and the welded rod inside the Base Frame.

18.Wrap the Short Cable (44) over a 3 1/2” Pulley (34). Attach the Pulley and a Cable Trap (36) between the second set of holes from the bottom of the pair of Pulley Plates (33) with an M10 x 50mm Button Head Bolt (57) and an M10 Nylon Locknut (64). Make sure the Cable Trap is ori- ented to hold the Cable in the groove of the Pulley.

19.Wrap the Short Cable (44) under a 3 1/2” Pulley (34). Attach the Pulley inside the Base Frame (1) with an M10 x 165mm Button Head Bolt (5) and an M10 Nylon Locknut (64).

16

 

 

34

64

 

 

1

 

44

 

5

17

 

 

34

 

44

64

 

 

Welded

 

Rod

 

5

 

1

18

 

64

33

 

57

 

36

 

34

 

44

19

 

 

44

 

34

64

1

 

5

10

 

Image 10
Contents QUESTIONS? Customer HOT LineTable of Contents Important Precautions Before YOU Begin Assembly Make Things Easier for YourselfHigh Side Numbers Short Weldment Letters on This side Weight Tube Letters Hole Adjustment Page Page Page See the inset drawing. The M6 Nylon Locknut Page Adjustments Adjusting the Weight Rests and Safety SpotterAttaching Weights to the Weight Carriage or Barbell Cable Diagrams Part Identification Chart Part LIST-Model No. NTB39020 No. NTB39020 Ordering Replacement Parts Limited Warranty