NordicTrack NTB39020 user manual See the inset drawing. The M6 Nylon Locknut

20. Thread an M6 Nut (71) onto the Short Cable (44).

20

Attach the end of the Short Cable to the “U”-

43

bracket (37) with an M6 Washer (63) and an M6

34

Nylon Locknut (66).

66

Wrap the Long Cable (43) under a 3 1/2” Pulley

63

43

(34). Attach the Pulley inside the “U”-bracket (37)

37

64

with an M10 x 50mm Button Head Bolt (57) and

57

an M10 Nylon Locknut (64).

44

See the inset drawing. The M6 Nylon Locknut

66

(66) should be threaded onto the Short Cable

(44) so that the end of the Short Cable is nearly

touching the Long Cable (43).

44

21. Wrap the Long Cable (43) around a 3 1/2” Pulley

21

60

(34). Attach the Pulley and a Cable Trap (36) to

36

the Center Top Frame (9) with an M10 x 47mm

Button Head Bolt (60), an M10 Washer (62), and

9

43

an M10 Nylon Locknut (64). Make sure the

34

Cable Trap is oriented to hold the Cable in the

groove of the Pulley.

62

64

22. Wrap the Long Cable (43) around a 3 1/2” Pulley

22

(34). Attach the Pulley and a Cable Trap (36) to

36

the Center Top Frame (9) with an M10 x 47mm

43 34

60

Button Head Bolt (60) and an M10 Nylon Locknut

64

(64). Make sure the Cable Trap is oriented to

9

hold the Cable in the groove of the Pulley.

23. Wrap the Long Cable (43) over a 3 1/2” Pulley

23

(34). Attach the Pulley and a Cable Trap (36) to

9

the Center Top Frame (9) with an M10 x 47mm

36

Button Head Bolt (60) and an M10 Nylon Locknut

(64). Make sure the Cable Trap is oriented to

hold the Cable in the groove of the Pulley.

34

60

64

43

11