NordicTrack NTB39020 user manual Part Identification Chart

Page 16

REMOVE THIS PART IDENTIFICATION CHART AND PART LIST/ EXPLODED DRAWING. SAVE THIS PART IDENTIFICATION CHART AND PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE.

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M10 x 22mm Button Head Bolt (59)

M10 x 25mm Screw (56)

 

M10 Washer (62)

M6 x 13mm Screw (21)

M10 x 47mm Button Head Bolt (60)

 

M6 Washer (63)

M10 x 50mm Button Head Bolt (57)

M10 Nylon Locknut (64)

M10 x 70mm Button Head Bolt (52)

M6 Nylon Locknut (66)

M10 x 118mm Button Head Bolt (67)

M6 Nut (71)

M10 x 116mm Carriage Bolt (53)

M10 x 152mm Button Head Bolt (54)

M10 x 165mm Button Head Bolt (5)

Image 16 Contents
QUESTIONS? Customer HOT LineTable of Contents Important Precautions Before YOU Begin Assembly Make Things Easier for YourselfHigh Side Numbers Short Weldment Letters on This side Weight Tube Letters Hole Adjustment Page Page Page See the inset drawing. The M6 Nylon Locknut Page Adjustments Adjusting the Weight Rests and Safety SpotterAttaching Weights to the Weight Carriage or Barbell Cable Diagrams Part Identification Chart Part LIST-Model No. NTB39020 No. NTB39020 Ordering Replacement Parts Limited Warranty
Related manuals
Manual 19 pages 40.13 Kb