NordicTrack NTL14905.3 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 13

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the

tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see your local NordicTrack dealer or call the toll-free telephone number on the front cover of this man- ual and order part number 146148, or see your local electronics store.

1

2

Grounded Outlet Box Surge Suppressor

Grounding Pin

Grounding Pin

Grounded Outlet

Grounding Plug

 

Grounded Outlet Box

Adapter

Surge Suppressor

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni- toring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc- tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec-

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is grounded before using an adapter.

13

Image 13
Contents Model No. NTL14905.3 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Power Lines Before YOU Begin Make sure that the power cord is unplugged AssemblyExtension Leg Bolts Page Page Press the Incline decrease button until the treadmill is At the lowest incline level. Unplug the power cord. WithHOW to Connect a 75 OHM Catv Cable HOW to Connect AN AntennaHOW to Connect a VCR 105 Pulse Plate Wire Small Cylinder HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Main Menu HOW to Turn on the PowerHOW to USE the Manual Mode Change the incline of the treadmill as desired Pulse sensor. Next, stand on the foot rails Measure your heart rate if desiredTurn on the fan if desired Whenkey. you are finished exercising, removeSelect a preset program HOW to USE a Preset ProgramPress the Start button to start the program Select a Custom program HOW to Create a Custom ProgramHOW to USE a Custom Program Adjust the maximum target heart rate setting if Desired HOW to USE a Heart Rate ProgramSelect a Heart Rate program Turn on the fan if desired HOW to Connect Your MP3 Player or CD Player HOW to Connect the Treadmill to USE Ifit ProgramsHOW to Connect Your Portable Stereo Audio CableHOW to Connect Your Computer HOW to Connect Your Home StereoHOW to USE AN Ifit MP3, CD, or Video Program HOW to Connect Your VCRSelect the iFIT mode Press the Play button on your MP3 player, CD Player, or VCRTurn on the fan if desired Follow the on-line instructions to start Program HOW to USE AN Ifit Program Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Press the Power button to turn on Television HOW to Operate the Personal TelevisionPress the Volume buttons to adjust the volume Press the Channel buttons to select Desired channelPress the Power button again and add or Delete channels HOW to USE the Information ModeOptional Chest Pulse Sensor HOW to Adjust the Cushioning SystemHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked on Problem Television reception is poor Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyQty Description R0306AOrdering Replacement Parts Exploded DRAWING-Model No. NTL14905.3 NTL14905.3 Limited Warranty