NordicTrack NTL07707.1 user manual Assembly

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver

,

adjustable wrench

, and rubber mallet

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included.

 

 

 

 

5/16" Star

1/4" Star

 

 

 

3/8" Star

Washer (33)–2

 

3/8" Nut (8)–3

Washer (10)–4

Base Pad Spacer

Washer (9)–4

 

 

 

(13)–2

 

 

 

 

 

#8 x 3/4"Screw (1)–4

#8 x 1" Tek Screw (2)–4

1/4" x 1 1/4" Bolt (5)–2

3/8" x 2" Bolt (4)–3

 

 

5/16" x 3 1/4" Bolt (7)–4

 

 

 

 

3/8" x 5" Bolt (6)–4

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Model No. NTL07707.1 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged See the inset drawing. Tie the long tieNot fully fold the Frame yet Be careful not to pinch the Upright WireFully tighten the Bolts yet Nut the Wheel must turn freely. DiscardConnectors should slide together easily Not to pinch the wiresPage Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleChange the incline of the treadmill as desired Measure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Workout Select one of the preset workoutsMonitor your progress with the display HOW to USE AN Ifit Card Insert an iFIT card and select a workoutHOW to USE the Stereo Sound System Information ModeHOW to Adjust the Cushioning System HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0907B Key No. Qty DescriptionQty Exploded Drawing A-Model No. NTL07707.1 Exploded Drawing B-Model No. NTL07707.1 Exploded Drawing C-Model No. NTL07707.1 Exploded Drawing D-Model No. NTL07707.1 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Related manuals
Manual 32 pages 14.95 Kb
Top Page Image Contents