NordicTrack NTEL59010 user manual HOW to USE the Elliptical Crosstrainer, Incline Adjustment

Page 9

HOW TO USE THE ELLIPTICAL CROSSTRAINER

EXERCISING ON THE ELLIPTICAL CROSSTRAINER

To mount the elliptical crosstrainer, hold the handgrip pulse sensor and step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedal disks can turn in either direction. It is recommended that you turn the pedal disks in the direction shown by the arrow below; however, to give variety to your exercise, you may turn the pedal disks in the opposite direction.

Handgrip

Pulse Sensor

Pedal

Pedal Disk

To dismount the elliptical crosstrainer, wait until the pedals come to a complete stop. The elliptical crosstrainer does not have a free wheel; the ped-

pedal. Slide the pedals forward or backward to the desired position, and then retighten the knobs. Make sure that both pedals are in the same position.

INCLINE ADJUSTMENT

To further adjust the intensity of your exercise, the incline frame can be raised or lowered. To raise the incline frame, position the spring arms side by side. Lift the end of the incline frame until the crossbar is on top of the incline bracket. Make sure that the crossbar is resting securely on top of the incline bracket. To lower the incline frame, lift the incline frame slightly, push the incline bracket toward the upright, and then lower the incline frame onto the sta- bilizer.

Upright

Incline

Incline

Frame

Bracket

 

Crossbar

 

Stabilizer

 

HOW TO USE THE UPPER BODY ARMS

als will continue to move until the flywheel stops. When the pedals are stationary, step off the highest pedal first. Then, step off the lowest pedal.

HOW TO ADJUST THE PEDALS

The upper body arms are designed to add upper-body exercise to your workouts. As you exercise, push

Upper Body Arms

The motion of the pedals is deter- mined by their position on the spring arms. Their are five dif- ferent pedal posi- tions. To adjust the pedals, first loosen the knob beneath each

Pedal

Knob

and pull the upper body arms in order to work your arms, back, and shoulders. To exercise only your lower body, hold the handgrip pulse sensor as you exercise.

Handgrip

Pulse

Sensor

9

Image 9
Contents QUESTIONS? Model No. NTEL59010 Serial NoCustomer HOT Line Table of Contents Important Precautions Before YOU Begin FrontBack Right Side Assembly Locknut the Incline Bracket must be able to pivot easily Page Installing the Receiver for the Optional Chest Pulse Sensor Incline Adjustment HOW to USE the Elliptical CrosstrainerHOW to USE the Upper Body Arms HOW to Adjust the PedalsConsole Diagram Features of the Console Refer to the drawing on Console DescriptionHOW to USE the Manual Mode Select one of the four preset programs HOW to USE a Preset ProgramBatteries Start the programSelect one of the two heart rate programs HOW to USE a Heart Rate ProgramEnter your age Hold the handgrip pulse sensorAudio Adapter Cable Headphones HOW to Connect Your Portable Stereo HOW to Connect Your Home StereoAudio Cable HOW to Connect Your VCR HOW to Connect Your ComputerPressVCR. the play button on your CD player or HOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the elliptical crosstrainer and begin Exercising Maintenance and Troubleshooting Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyQty Description Part LIST-Model No. NTEL59010NTEL59010No Limited Warranty HOW to Order Replacement Parts