NordicTrack NTEL7706.0 user manual See the inset drawing. Lift the Pedal Arm

4. Identify the Left Pedal (34) and the Left Pedal	4
Arm (32), which are marked with stickers.			34
Attach the Left Pedal (34) to the Left Pedal	32
Arm (32) with two M6 x 62mm Screws (108),
two M6 x 35mm Screws (109), and four M6
Split Washers (102).
Attach the Right Pedal (not shown) to the
Right Pedal Arm (not shown) in the same
way.		102
		109	102
	108
			109
			102
5. Insert the Roller (38) on the Left Pedal Arm (32)	5
and the Roller on the Right Pedal Arm (33) into				116
the sides of the Ramp (5).
				7
Attach the Rear Ramp Cover (7) to the
Ramp (5) with two M4 x 16mm Screws (116).			33
See the inset drawing. Lift the Pedal Arm
Latch (41) on the Left Pedal Arm (32), and set
the end of the Left Pedal Arm on the left Crank
Bushing Sleeve (54). Release the Pedal Arm
Latch, and make sure that the Left Pedal Arm is
securely connected to the Crank Bushing
Sleeve.				38
		5
Connect the Right Pedal Arm (not shown) to
the right Crank Bushing Sleeve (not shown)
in the same way.
			32
		32
		41
		54
	7