NordicTrack NTEL7706.0 user manual Frame 1 be careful not to damage the Wire, Be careful not

Page 8

6. While another person holds the Upright (10)

6

 

near the Frame (1), connect the Upper Wire

 

 

 

Harness (65) to the Lower Wire Harness (64).

 

 

Carefully insert the Upright (10) into the

 

 

Frame (1); be careful not to damage the Wire

 

 

Harnesses (64, 65). Attach the Upright with four

 

 

M8 x 20mm Button Screws (107) and four M8

 

 

Split Washers (101).

Be careful not

 

 

 

 

to damage the

 

 

Wire Harnesses

 

 

(64, 65) during

 

 

this step.

 

 

 

10

 

65

107

 

 

 

64

 

 

101

101

 

 

 

107

1

7. Attach the Left Upper Body Arm (22) to the left

7

 

Upper Body Leg (24) with three M8 x 15mm

 

 

 

Button Screws (106).

 

23

 

 

Attach the Right Upper Body Arm (23) in the

 

 

same way.

 

 

 

22

 

 

106

 

 

24

 

8. Hold the Left Rear Upper Body Cover (26) and

8

 

the Left Front Upper Body Cover (27) around

 

 

29

the left Upper Body Leg (24). Attach the Upper

 

116

 

Body Covers with five M4 x 16mm Screws (116).

 

 

 

Attach the Right Rear Upper Body Cover (28)

 

28

 

 

and the Right Front Upper Body Cover (29)

27

 

in the same way.

 

 

 

24

26

 

 

 

 

116

 

8

 

Image 8
Contents Call TOLL-FREE QUESTIONS?Model No. NTEL7706.0 Serial No Table of Contents Important Precautions Before YOU Begin FrontRear Right SideAssembly Screw M10 x 93mm Button Screw111 Grease See the inset drawing. Lift the Pedal Arm Frame 1 be careful not to damage the Wire Wire Harnesses 64, 65 during This stepBe careful not Attach the Right Upper Body Arm 23 Same wayRepeat this step with the Right Link Arm Attach the Right Link Arm 31 in the same wayHOW to USE the Elliptical Exerciser HOW to Fold and Unfold the Elliptical ExerciserHOW to Move the Elliptical Exerciser HOW to Change the Incline of the RampHOW to Exercise on the Elliptical Exerciser Console Diagram Features of the ConsolePedals as desired HOW to USE the Manual ModePedaling to turn on the console Turn on the fan if desired Will turn off automaticallyBegin pedaling to start the program HOW to USE a Preset ProgramSelect a preset program Select a heart rate program HOW to USE a Heart Rate ProgramEnter a target heart rate setting Insert an iFIT Card and select a program HOW to USE AN Ifit ProgramHOW to USE the Stereo Sound System Maintenance and Troubleshooting Battery ReplacementHOW to Eliminate Rubbing of the Discs Handgrip Pulse Sensor TroubleshootingConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. NTEL7706.0 Key No. Qty DescriptionQty Description R0207A Exploded Drawing B-Model No. NTEL7706.0 HOW to Order Replacement Parts Limited Warranty