JVC CA-MXJ100 manual Using Recording Timer, When selecting FM, MW, or LW, Press CLOCK/TIMER

English

7 When selecting “FM,” “MW,” or “LW.”

Press 4 or ¢ to select the
preset station number, then press
PROGRAM/SET.
The unit enters recording timer
setting mode.
If you want to continue the Recording
Timer setting, go to step 3 of the
Recording Timer setting procedure.	PROGRAM/SET

3 Press PROGRAM/SET.

“ON TIME” appears for 2 seconds, then	PROGRAM/SET
the unit enters on-time setting mode.

8 Press CLOCK/TIMER. CLOCK/TIMER

Theindicator stops flashing and remains lit.

If you have set the Daily Timer with the unit turned on, turn off the unit.

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, sets the volume level to the preset level and starts recording when the on-time comes. Then, when the off-time comes, the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting the timer, press CLOCK/TIMER once and start from step 1 again.

4 Set the on-time you want the unit to turn on.

1)Press 4 or ¢to set the hour, then press PROGRAM/

SET.
2) Press 4 or ¢to set the
minute, then press
PROGRAM/SET.
“OFF TIME” appears for 2 seconds,
then the unit enters off-time setting
mode.	PROGRAM/SET

5 Set the off-time you want the unit to turn off (on standby).

1)Press 4 or ¢to set the hour, then press PROGRAM/ SET.

2)Press 4 or ¢to set the minute, then press PROGRAM/ SET.

The unit enters the volume setting

mode. PROGRAM/SET

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press CLOCK/TIMER until “	CLOCK/TIMER
REC” appears on the display.

The indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

Clock time CLOCK

REC TIMER

6 Set the volume level when the unit is turned on.

Press 4or ¢ to set the volume, then press PROGRAM/ SET.

The unit enters source selecting mode. PROGRAM/SET

– 17 –