ParaBody Hip Sled System manual Reverse View

Page 13

	43 1/2 X 4-1/2”
6
32		14
32
32		16
32
33		21
	9	21
	9	14
		14
8
		REVERSE VIEW
		FOR ASSEMBLY
		6
FIGURE 9

STEP 9:

•SECURELY reassemble the LEFT (8) and RIGHT (9) RAILS to the REAR UPRIGHT (6) as shown in FIGURE 9 using the two 1/2 X 4-1/2” BOLTS (43), four 1/2” WASHERS (32), and two 1/2” LOCK NUTS (33). (!!! IMPORTANT !!! BEFORE TIGHTENING

MOVE THE RAILS IN AS FAR AS POSSIBLE)

•SECURELY tighten the two 3/8 X 4-1/2” BOLTS (38) holding the SEAT PAD (18) from STEP 5. (!!! IMPORTANT !!! BEFORE

TIGHTENING MOVE THE RAILS IN AS FAR AS POSSIBLE)

•To adjust the side to side movement of the CARRIAGE (16), start by sliding the CARRIAGE (16) as far to the left as possible inside the RAILS (8 & 9). Adjust the ADJ. WHEEL BRACKETS (14) out until the 2” DIA. WHEELS (21) contact the RIGHT

RAIL (9). SECURELY tighten bolt connection. See FIGURE 9 and REVERSE CARRIAGE VIEW.

13

Image 13