ParaBody Hip Sled System manual Off-Settooneside

30	29	26
3/8 X 3” 37
		17
3		SURFACETO BE EVEN
33
32
41 1/2 X 3-1/4”
FIGURE 11
STEP 11:

•SECURELY assemble the two PAD SUPPORTS (3) to the CARRIAGE (16) as shown in FIGURE 11 using two 1/2 X 3-1/4” BOLTS (41), four 1/2” WASHERS (32), and two 1/2” LOCK NUTS (33).

•SECURELY assemble two SHOULDER PADS (17) to the PAD SUPPORTS (3) on the CARRIAGE (16) as shown in FIGURE 11 using four 3/8 X 3” BOLTS (37), four 3/8” LOCK WASHERS (30), and four 3/8” WASHERS (29). (NOTE: THAT HOLES IN PADS ARE

OFF-SETTOONESIDE)

15