| 25 |
|
|
| 3/8 X |
| 19 |
|
| 21 | 1 |
|
| |
21 |
|
|
|
| 4 |
|
| 33 |
|
| 2 |
33 | 19 | 29 |
| 3/8 X 3” 17 |
|
FIGURE 3 |
|
|
STEP 3:
•Insert four 2” SQ. END CAPS (33) into the BASE TUBES of the UPRIGHT FRAME (1) as shown in FIGURE 3.
•SECURELY assemble the BENCH FRAME (2) to the UPRIGHT FRAME (1) using two 3/8 X 3” BOLTS (17), one 3/8 X
•SECURELY assemble two 3/8” SPRING PIN ASSEMBLIES (25) to the SPRING PIN HOUSING on the UPRIGHT FRAME (1) as shown in FIGURE 3. (NOTE: !!!IMPORTANT!!! Tighten the nut of the SPRING PIN ASSEMBLY SECURELY!)
•Secure the WOLFF SLEEVE (4) in place with one THUMBSCREW (29).
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | ||||||
6