| 6 |
| 18 |
| 41 |
| 3/8 X 1-3/4” 49 |
| 3/8 X 1-3/4” 49 |
| 19 |
| 41 |
| 55 |
1 | 5 |
| 8 |
3/8 X 1-1/4” 44 | 27 |
38 | |
FIGURE 15 | 41 |
STEP 15
•Securely assemble one 4-1/2” PULLEY (18) to the FLOATING PULLEY BRACKET (6) using one 3/8 X 1-3/4” BOLT (49) and one 3/8” LOCK NUT (41) as shown in FIGURE 15.
•Securely assemble one 3-1/2” PULLEY (19) to the BASE (8) using one 3/8 X 1-3/4” BOLT (49), one “L” BRACKET (55), and one 3/8” LOCK NUT (41) as shown in FIGURE 15. (Note: The “L” BRACKET should be positioned at a 45 degree angle to function properly.)
•Route the “Loop” end of the LEG CURL CABLE (27) around the SWIVEL PULLEY BRACKET (5) and the previously in- stalled pulleys and securely assemble it to the LEG CURL EXT (1) using one 3/8 X 1-1/4” BOLT (44), one 3/8” WASHER (38), and one 3/8” LOCK NUT (41) as shown in FIGURE 15.
15
