ParaBody 250101 manual Step

Page 4

	2	9
	2
		40
		39
3/8 X 2-3/4”	48
		46 1/2 X 3”
		41
FIGURE 1

STEP 1

•Loosely assemble the REAR UPRIGHT (9) to the BASE (8) using two 1/2 X 3” BOLTS (46), two 1/2” FLAT WASHERS (39), and two 1/2” LOCK NUTS (40). See FIGURE 1.

•Loosely assemble the FRONT UPRIGHT (2) to the BASE (8) using one 3/8 X 2-3/4” BOLT (48) and one 3/8” LOCK NUT (41) as shown in FIGURE 1.

Image 4

Contents Home GYM Important Notes Parts List Step Guide Rods Step Step LOW Height X 3-3/4 X 3 Base Step 48 3/8 X 2-3/4 Step X 1-3/4 On next From previous Addendum Instructions