ParaBody 250101 manual X 3-3/4

12		45	3/8 X 3-3/4”
		38
	12
38	4	2
	57
48 3/8 X 2-3/4”	2
		33
FIGURE 8		35

STEP 8

•Securely assemble one SPRING PIN ASSEMBLY (35) and one 3 PRONG KNOB (33) to the FRONT UPRIGHT (2) as shown.

•Apply eight PARAGLIDES (57) to the INSIDE of the tube on the FRONT UPRIGHT (2) as shown.

•Securely assemble one SEAT PAD (12) to the PRESS SEAT (4) using two 3/8 X 2-3/4” BOLTS (48) and two 3/8” WASHERS (38) as shown in FIGURE 8.

•Insert the PRESS SEAT ASSEMBLY into the FRONT UPRIGHT (2) as shown. The PRESS SEAT height can be adjusted using the SPRING PIN (35) and can be secured with the 3 PRONG KNOB (33).

•Securely assemble one SEAT PAD (12) to the FRONT UPRIGHT (2) using two 3/8 X 3-3/4” BOLTS (45) and two 3/8” WASHERS (38) as shown in FIGURE 8.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

9