Nut

STEP 6

•Attach CABLE SWIVEL (3) to the ADJUSTMENT TUBE on the 100 LEG PRESS using the existing previously removed 3/8 X 4-1/2” BOLTS, WASHERS, 2” WHEELS AND NUT. (Note: Securely tighten, then back off 1/4 turn to allow the CABLE SWIVEL & WHEELS to rotate freely.) See FIGURE 6.

2” WHEEL

2” WHEEL

3/8 X 4-1/2” BOLT

FIGURE 6

3/8 X 3” 14	10
3/8 X 3” 14
	11
	10
	1
FIGURE 7

STEP 7

•Securely fasten the 100 LEG PRESS to the FRONT LEG (1) using two 3/8 X 3” BOLTS (14), four 3/8” WASHERS (10), and two 3/8” LOCKNUTS (11) as shown in FIGURE 7.