EN
TROUBLESHOOTING
See below for some common problems and their remedies. Whatever the problem, you should first check that:
•The base unit is connected to the power supply and phone line.
•The main power is switched on at the electrical outlet.
•The handset battery is installed and has not run out of power.
DO NOT attempt to make repairs yourself. This will void your warranty.
PROBLEM
Unable to make a call -
OUT OF RANGE appears on the handset
Unable to make a call -
NOT REGISTERED appears on the handset
Unable to enter the submenus
Caller ID is not displayed
POSSIBLE CAUSES / REMEDIES
•The handset is out of range of base unit - move closer to the base
•Interference due to environment - position base unit to reduce interference (move higher)
•
•Handset may not be registered to base unit (see the section in this manual titled
HANDSET REGISTRATION ).
•Ensure unit is not in the base cradle.
•Return to standby mode by pressing 
•You must subscribe to Caller ID service through your local phone company for this feature to work. Contact your local phone company to confirm you have subscribed to Caller ID service.
•Wait until the phone rings twice before answering.
•Full name and number (including area code ) need to be stored in Phonebook for name display if the name is unavailable through Caller ID.
10
