Kenwood KDC-4554U, KDC-3254URY, KDC-316UR Troubleshooting, Tuner SET, Symptom Remedy/Cause

[SETTINGS]

	Item	Selectable setting (Preset: *)
DISPLAY (for
		)
	DISP DIMMER	ON: Dims the display illumination. ; OFF*: Cancels.
	TEXT SCROLL	AUTO*/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;
		OFF: Cancels.
TUNER SET		TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO ATP SEEK/ ATP SEEK: Selectable only if any source other
		than tuner source is selected. (For details, see page 9.)

ENGLISH

Troubleshooting

Symptom	Remedy/Cause
Sound cannot be heard.	Adjust the volume to the optimum level. / Check the cords and connections.
“PROTECT” appears and no operations	Check to be sure the terminals of the speaker leads are covered with insulating
can be done.	tape properly, then reset the unit. If “PROTECT” does not disappear, consult your
	nearest service center.
Sound cannot be heard. / The unit does	The connectors are dirty. Clean the connectors. (page 4)
not turn on. / Information shown on the
display is incorrect.
The unit does not work at all.	Reset the unit. (page 4)
[P-OFF WAIT] does not work.	Turn off the demonstration mode. (page 7)
Radio reception is poor. / Static noise	Connect the antenna firmly. / Pull the antenna out all the way.
while listening to the radio.
“IN” flashes.	The CD player is not operating properly. Reinsert the disc properly. If the condition
	did not improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played back and	Insert a finalized CD-R/CD-RW (finalize with the component which you used for
tracks cannot be skipped.	recording).
Disc sound is sometimes interrupted.	Stop playback while driving on rough roads. / Change the disc. / Check the cords
	and connections.
“NA FILE” appears.	The unit is playing an unsupported audio file.
“NO DISC” appears.	Insert a playable disc into the loading slot.
“TOC ERROR” appears.	The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try
	another disc instead.
“ERROR 99” appears.	The unit is malfunctioning for some reason. Press the reset button on the unit. If
	the “ERROR 99” code does not disappear, consult your nearest service center.
	Continued...

17