Attaching Weights

To use the Leg Lever (5), slide the desired Weights (61 or 62) onto the weight tube on the Leg Lever. Do not place more than 50 pounds on the Leg Lever.

WARNING: When using the Leg Lever (5), place the barbell with the same amount of weight on the Upright (4) weight rests to balance the bench.

To use the Weight Carriage (10), slide an equal amount of Weight (61 or 62) onto each side of the weight tube. Secure the Weights with the Weight Clips (33). Do not place more than 80 pounds on the Weight Carriage.

See the inset drawing. To use the Butterfly Arms (6, 56), first make sure there is a Weight Stop (not shown) on each weight tube. Then slide the desired Weights (61 or 62) onto the weight tubes. Do not place more than 30 pounds on each Butterfly Arm.

ATTACHING WEIGHTS TO THE BARBELL

Slide an equal amount of Weight (61, 62) onto each end of the barbell. Slide the two Lock Collars (63) against the Weights, and tighten them fully.

WARNING: Always secure the Weights (61, 62) on the barbell with the Lock Collars (63). Never use the barbell with more than 100 pounds.

56
10
5
61 or 62
33
6
61 or 62
61 or 62
Barbell
61
62
63