Reebok Fitness RBBE2057.0 manual

Page 9

7.Attach the Left and Right Frames (4, 5) to the Left and Right Bases (1, 2) with four M10 x 85mm Button Bolts (51) and four M10 Nylon Locknuts (65).

8.Attach the Top Cover (23) and the Bottom Cover (24) to the Center Frame (7) with two M4 x 15mm Screws (58) and an M4 x 30mm Screw (63).

Attach the Center Frame Extension (6) to the Center Frame (7) with two M10 x 53mm Button Bolts (49) and two M10 Nylon Locknuts (65).

9.Orient the Headrest Frame (9) and the Backrest Frame (8) as shown. Attach the Headrest Frame to the Backrest Frame with two M10 x 16mm Button Screws (54).

7
5	65
	65
65		2	4
		2	4
			65
			65
			1
	51
			51
8	58	23
		23
			24
			24
	7		63
	7
			58
49
	6	65
		65
9
		9
	54
			54
	8
9

Image 9

Contents Model No. RBBE2057.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Before YOU Begin Assembled DimensionsPart Identification Chart Make Assembly Easier AssemblyBefore beginning assembly, make sure Repeat this step for the Right BasePage See the inset drawing. Identify the Center Frame Page Screws yet Attach the other Front Ankle Brace 22 in the same way Page Page Adjustment Adjusting the LEG FrameSelecting the Backrest Frame POSI- Tion Setting the Inversion Angle Using the Ankle LockLeveling the Inversion Table Locking the Inversion TableDo not sit up to return to the starting position Rotating on the Inversion TableBeginner Program Developing a ProgramFull Inversion Program Do not attempt to do sit-upsQty Description Part LIST-Model No. RBBE2057.0Exploded DRAWING-Model No. RBBE2057.0 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT