9. Firmly tighten the four M8 x 31mm Button Screws | 9 |
| ||
(80) in the Seat Carriage (11). |
| |||
|
| |||
Pull the seat knob and slide the Seat Carriage (11) |
|
| ||
to the desired position. Release the seat knob and |
|
| ||
slide the Seat Carriage back and forth slightly |
|
| ||
until it locks into position. |
|
|
| |
|
|
| 11 |
|
|
|
| 80 |
|
|
|
| Knob |
|
10. Identify the Right Pedal (37), which is marked with | 10 |
| ||
an “R.” Using an adjustable wrench, tighten the |
| |||
|
| |||
Right Pedal | clockwise | into the Right Crank Arm (65). |
| |
Tighten the Left Pedal | counterclockwise | into the Left |
| |
Crank Arm (not shown). |
| 65 | 38 | |
Adjust the Right Pedal Strap (38) to the desired |
|
| ||
position, and press the end of the Pedal Strap onto |
|
| ||
the tab on the Right Pedal (37). Adjust the Left |
| 37 | ||
Pedal Strap (not shown) in the same way. |
| |||
|
| |||
|
|
|
| Tab |
11.Make sure that all parts are properly tightened before you use the exercise cycle. Place a mat beneath the exercise cycle to protect the floor.
7