9. | Firmly tighten the four M8 x 31mm Button Screws | 9 |
|
| (80) in the Seat Carriage (11). |
| |
|
|
| |
| Pull the seat knob and slide the Seat Carriage (11) |
|
|
| to the desired position. Release the seat knob and |
|
|
| slide the Seat Carriage back and forth slightly |
|
|
| until it locks into position. |
|
|
|
| 11 |
|
|
| 80 |
|
|
| Knob |
|
10. | Identify the Right Pedal (37), which is marked with | 10 |
|
| an “R.” Using an adjustable wrench, tighten the |
| |
|
|
| |
| Right Pedal clockwise into the Right Crank Arm (65). |
|
|
| Tighten the Left Pedal counterclockwise into the Left |
|
|
| Crank Arm (not shown). | 65 | 38 |
| Adjust the Right Pedal Strap (38) to the desired |
|
|
| position, and press the end of the Pedal Strap onto |
|
|
| the tab on the Right Pedal (37). Adjust the Left |
| 37 |
| Pedal Strap (not shown) in the same way. |
| |
|
|
| |
|
|
| Tab |
11.Make sure that all parts are tightened before you use the exercise cycle. Place a mat beneath the exercise cycle to protect the floor.
7