Assembly
Figure 8
Locate Console. Carefully feed Pulse Wires from the Console down the Console tube. Connect Upper Console Wire to the appro- priate location on the back of the Console. Secure Console to Console Tube using four Screws.
Note: The four Console Screws will already be installed into the back of Console when you remove it from the box.
Figure 9
Locate bag labeled Figure 9. Connect the Pulse Wires coming from the Pulse Handlebar Assy to the Pulse Wires from the Console. Secure Pulse Handlebar Assembly to Console Tube using six M6*10 Hex Socket Head Bolts.
Note: Ensure that all wires are secure inside console tube. Be careful not to pinch wires.
Figure 8 |
Figure 9 | PULSE WIRE |
| |
PULSE HANDLEBAR ASSY | |
M6*10 HEX SOCKET BOLT | |
CONGRATULATIONS!
You have completed assembly of your CDT Elliptical.
10