Ironman Fitness CDT owner manual Sleeve

Page 8

Assembly

Figure 4

Locate bag labeled Figure 4. Lift and place left Linkage onto Sleeve and align holes. Secure Linkage to unit using four M8*12 mm Hex Bolts. Repeat for right side.

Note: The Linkage is secured to the sleeve with three M8*12 Hex Bolts on the top of the Linkage and one M8*12 Hex Bolt on the bottom of the Linkage.

Figure 5

Locate bag labeled Figure 5. Locate Right Pedal Tube Assembly. Secure Pedal Tube assembly to the Handrail Assembly with one M10*81.5 Hex Bolt and one M10*1.5 Hex Nut. Please ensure that Pedal arm is aligned in the center of roller wheel while tightening M10*81.5 (Figure 5a). Repeat for the left side.

Note: It is recommended that 2 adults align and secure the Pedal Tube Assemblies to the Handrail Assemblies.

Figure 5a

Figure 4

SLEEVE

LINKAGE

M8*12 HEX BOLT

Figure 5

HANDRAIL ASSEMBLY

 

PEDAL TUBE ASSEMBLY

 

 

M10*1.5 HEX NUT

M10*81.5 HEX BOLT

 

Image 8
Contents CDT Elliptical Table of Contents Important Safety Information Safety Precautions and TipsSafety Precautions and Tips for Chest Strap Assembly Console Tube Cover Sleeve Bracket Cover Congratulations Console Instructions Console ButtonsConsole Functions Program Instructions Manual Program General InformationGetting Started Preset Programs User ProgramWatt Program Heart Rate ProgramsProper Installation of Heart Rate Receiver Body FAT ProgramBody Fat Body Type Female Male Athlete Monitoring Your Heart Rate Monitoring Your Heart RateWarm Up Exercises Trouble Shooting Guide CLEANING/MAINTENANCEParts List CDT Elliptical Parts List Rev aExploded View Warranty Information