Assembly
Figure 2
Locate Bag labeled Figure 2. Locate Cover. Secure Cover to Main Frame by using three M5*8 Screws through the left side of unit.
Repeat for the right side.
Figure 3
Locate Bag labeled Figure 3. Locate Left and Right Handrail Assemblies. Secure Left Handrail Assembly to Console tube by using one Washer, one Spring Washer, one M10*20 Hex Bolt, and one End Cap. Repeat for the right side.
Note: The Handrail Assembly will only go onto the Console Tube one way. The connector on the middle of the Handrail Assembly will face outwards.
Figure 2 |
CONSOLE TUBE |
COVER |
M5*8 SCREW |
Figure 3 |
CONSOLE TUBE |
SPRING WASHER |
M10*20, HEX BOLT |
WASHER |
END CAP |
HANDRAIL ASSEMBLY |