Life Fitness SM81 manual LOW ROW Cable Routing, Adjustable crossover cable end detail

Page 14

SM81 Unpacking & Assembly Instructions

Figure 17. Adjustable crossover cable end detail.

Using a 7/8” wrench, tighten the jam nut onto the adjustable pulley threads as shown in Figure 17. Place a rubber cap on the top of the cable as shown in Figure 17 (right).

LOW ROW CABLE ROUTING

Route the low row cables as shown in Figure 18.

Figure 18. Low row cable routing.

Image 14

Contents M051-K50-B117 Materials and Tools Required for Assembly Assembly TimeParts box contents box 1 on left, box 2 on right UnpackingAssembly SM81 main components seats and cables removed for claritySet the weight stack cubes Bolt on the teardrop pulleys Mount lat tops and tricep tops Mount rubber bumpers and the weight stacks Bolt on the top plate Bolt the floating pulleys into the 190 lb weight stacks Mount the benches to the frame Installing the Cables Removing the pulley boltsAdjustable Crossover Cable Routing Adjustable crossover cable routingAdjustable crossover cable end detail LOW ROW Cable RoutingScrew the cable into the weight stack LAT Pulldown Cable RoutingTricep Pushdown Cable Routing Tricep pushdown cable routingHardware . Assembly Parts HardwareHardware . Rubber caps Hardware . Cable jam nut Hardware . CablesHardware . Top assemblies Hardware . Weight stack rubber bumpers Hardware . Floating pulleysParts List Pulley hardware InstalledHardware installed Floating pulley