Life Fitness SM81 manual Bolt the floating pulleys into the 190 lb weight stacks

SM81 Unpacking & Assembly Instructions

rest mounted to the frame as shown in Figure 9). You will need to remove the pulley from the housing to thread the plug into the weight stack bayonet. Make sure the 9/16” jam nut is threaded 1-5/8” away from the pulley as shown in Figure 11. Leave the pulleys out since you will need to have them out when the cable is routed.

Figure 11. Bolt the floating pulleys into the 190 lb weight stacks.

7.Mount adjustable pulley brackets. When shipped, the adjustable pulley brackets look like the ones shown in Figure 12. The bolts need to be removed and the bracket needs to be positioned so that the top of the bracket is in the top hole as shown by the arrow in Figure 12. Use a 3” bolt with flat washers, end cap washers and end caps. When you remove the bolts, leave the pulley bolt and pulley out since you will need to thread the cable with the pulley removed.

Figure 12. Mount adjustable pulley bracket.

8.Mount the seated row and lat benches to the frame. Using the bolts specified in Figure 13 and a 9/16” socket and combination wrenches, mount the benches as shown in Figures 13 and 14.

10