Life Fitness SM81 manual LAT Pulldown Cable Routing, Screw the cable into the weight stack

Page 15

SM81 Unpacking & Assembly Instructions

Bolt the cable to the weight stacks as shown in Figure 19. Thread the 7/8” nut up on the cable bolt as shown at left. Screw the bolt down into the weight stack as shown at right. Tighten the bolt with a 7/8” combination wrench.

Figure 19. Screw the cable into the weight stack.

LAT PULLDOWN CABLE ROUTING

Route the lat pulldown cable as shown in Figure 20. Screw the cable into the weight stack as shown previously in Figure 19.

Figure 20. Lat pulldown cable routing.

15

Image 15

Contents M051-K50-B117 Assembly Time Materials and Tools Required for AssemblyUnpacking Parts box contents box 1 on left, box 2 on rightSM81 main components seats and cables removed for clarity AssemblySet the weight stack cubes Bolt on the teardrop pulleys Mount lat tops and tricep tops Mount rubber bumpers and the weight stacks Bolt on the top plate Bolt the floating pulleys into the 190 lb weight stacks Mount the benches to the frame Removing the pulley bolts Installing the CablesAdjustable crossover cable routing Adjustable Crossover Cable RoutingLOW ROW Cable Routing Adjustable crossover cable end detailLAT Pulldown Cable Routing Screw the cable into the weight stackTricep pushdown cable routing Tricep Pushdown Cable RoutingHardware Hardware . Assembly PartsHardware . Rubber caps Hardware . Cables Hardware . Cable jam nutHardware . Top assemblies Hardware . Floating pulleys Hardware . Weight stack rubber bumpersParts List Floating pulley InstalledHardware installed Pulley hardware